Recently Viewed

Carscope Pro Automotive Oscilloscope Extended Service Kit

Carscope Pro Automotive Oscilloscope Extended Service Kit
  Zoom
Our Price:  £946.00
List Price:  £999.00
Saving Of:  5%
(Inc. 20% VAT)

Brand:  Autoditex

Delivery:  No charge

Availability:  

  

The Ditex Automotive Diagnostics Kits can be used to measure and test all of the electrical and electronic circuits and components in any modern vehicle. These 4–channel scope kits allow you to diagnose complex problems and testing more signals at the same time. With our Automotive Diagnostics Kits, the automotive specialist obtains all necessary tools to perform most of the diagnostic tests to locate the problem.

Ditex automotive diagnostics kits are suitable for use with any modern vehicle. The automotive kits are based around the CarScope Pro automotive oscilloscope.


The Carscope LAN Automotive  Oscilloscope Extended Service kit includes all the accessories you would need to begin diagnosing problems with vehicle control systems.

General description

   The CarScope Lan
 is a system specially designed as a reliable and easy to use tool primarily for automobile service professionals. It consists of a PC program in combination with a suitable hardware device.
   Use of CarScope LAN is both quick and easy. Simply select the sensor, actuator or ignition circuit that’s going to be tested and the software automatically loads the required settings and gives you full details how to connect the CarScope LAN, along with advice on how the waveform should look like and general technical information on the component or the system being tested.
   It is also important to note, that the CarScope LAN is a high efficiency ignition analyzer. Ignition waveform test function can be used to test the primary and secondary ignitions. Their waveforms are displayed in a single cylinder waveform and a parade waveform. It can be used to test all kinds of ignition systems. 

Electrical safety of computer used!
Ethernet RJ45 Sockets are magnetically coupled and therefore CarScope LAN device and PC are galvanically isolated. The galvanic isolation completely eliminates the risk of damage to the computer that is used from electrical overvoltages and transient voltage spikes. It also eliminates ground loop currents flowing between the PC and CarScope device which can cause damage and inaccurate measurements.

CarScope LAN is free from USB connectivity problems!
A great advantage of the LAN connection is the great common mode rejection. Magnetic filtering minimizes static discharge noise, magnetic fields and radio frequency interference.

Features
• 4-Channel PC Based Automotive Oscilloscope
• Engine Analyzer, suitable for use with any vehicle
• Ignition Waveform Analyzer Capabilities
• Predefined sensor-specific measuring settings
• Many automotive accessories are available
• No need to install specific-scope drivers
• Overload and reverse polarity protection
• Local Area network technology
• TCP/IP server mode is used
• LAN connection status indicator
• Future firmware updates through internet
• Wide power supply range
• Real Time Screen Refresh Rates

• Compatible with Windows XP, Vista, 7, 8 and 10 

(requires .net 3.5 installed)

http://onhax.net/how-to-install-net-framework-3-5-offline-in-windows-10-fixed

 
 

What is typical for the software?

The software program includes an extensive automotive library to compare the signals and a help system to work with it. 

It can record all measurement results for later analysis or to create a typical faults database.

Regular free software updates.

CarScope LAN/Pro program version is not final. Each subsequent new updated and improved program version will be completely free for our customers and you’ll be able to download it in the Download section.

The CarScope LAN/Pro program will never expire after a specified period. 
It can be installed and operated on more than one computer.

 
Technical specifications
Networking Standards Conforms to the IEEE 802.3 specification
Ethernet cable type A twisted pair cable with RJ-45 style connectors
Maximum cable length 100 m (328 ft.)
Operating Mode Local area network technology
Oscilloscope Inputs 4 Inputs;F0E6C8±20 Volts; 1MΩ in parallel with 30 pF
Secondary Ignition Inputs Any input channel (capacitive pick-up clamp)
Primary Ignition Inputs Any input channel (20:1 attenuator)
Input ranges (full scale) ±0.5V; ±1V; ±2V; ±5V; ±10V; ±20V
Input Overload Protection ±200V DC+AC peak 
Trigger Source Channel 1, Channel 2, Channel 3 and Channel 4
Trigger Type Automatic, Single Shot, None
Trigger  Edge Rising edge, Falling edge
Maximum sampling rate 2 independent 1 mega-samples/sec ADCs
Power sources Vehicle Battery (isolated)
External AC/DC Converter 
Power supply range 8V to 36V DC
Power consumption 350mA max
Dimensions Approximately 135mm (w) x 40mm (h) x 195mm (d)
Weight (main unit) Approximately 0.4kg
Weight (basic set) Approximately 0.95kg
 

Typical applications

4-Channel Oscilloscope
   CarScope LAN is a universal oscilloscope and it is not bounded to any brand or any model car.

Comprehensive Engine Analysis
   CarScope LAN is the single solution to all your engine analysis needs. It’s designed with excellent opportunities to test all types of sensors and actuators used in modern cars.

Ignition Analyzer 
   CarScope LAN is a high efficiency automotive engine analyzer. It is specially designed for automobile test and analysis of ignition systems. Ignition waveform test function can be used to test the primary and secondary ignitions. Their waveforms are displayed in a single cylinder waveform and a parade waveform. It can be used to test all kinds of ignition systems. It can be used to test ignition systems with or without distributor, and obtain ignition peak voltage, spark voltage and spark duration.

Engine Analyzer
   With the additional Pressure Pulse Sensor, CarScope LAN can be used for indirect checking of the engine's mechanical condition.

System Requirements:
Operating System Windows XP, Vista, Windows 7, Windows 8,10; 32-bit / 64-bit
Computer Processor 1.5 GHz (XP), 2-GHz 32-bit / 64-bit or better
Computer Memory (RAM) 2 GB memory or higher
Screen Resolution 1280x800 pixels or higher
Free Hard Disk Space 100 MB
LAN Network Adapter 10BASE-T/100BASE-TX IEEE-802.3 compliant
   

• CarScope LAN - main hardware unit;
• Universal main probe – 1 piece;
• Universal probes – 3 pieces;
• LAN network cable;    
• Power supply cable;
• Setup CD with the program. 

   
Warranty:

• Our products are 100% tested before being offered to our clients.
• Each system CarScope LAN, bought from us, has 1 year full warranty. Absolutely all defects arising during the warranty period   are fixed for free. Freight costs are paid by the customer.
• Each CarScope LAN has full after warranty support. Repair and shipping costs after the warranty period, are paid by the   customer.

Included accessories in the extended kit

Based on the excellent Carscope  4 channel oscilloscope this kit is the ideal starting point for the tech starting out in vehicle oscilloscope diagnosis.
Includes the following:

  • Carscope LAN basic kit*
  • Acupuncture Probe set  (set of 5 probes with spare needles)
  • Piercing test clip X2 
  • Attenuator 10 :1 X2
  • Attenuator 20:1 X2
  • 25A Crocodile clip X1
  • 25A Crocodile clip X1
  • Coil on plug pick up sensor X 4
  • Coil on Plug extension lead X 4
  • 60 Amp AC/DC Current Clamp
  • 600 Amp AC/DC Current Clamp
  • No1 Cylinder Trigger Pick up Clamp
  • Capacitive Pick up Clamp X4
  • Autoditex PPS Pressure pulse sensor
  • Aluminium Storage case

*Basic kit includes:

  • Carscope 4 channel oscilloscope  1pc
  • Universal main probe 1pc
  • universal probe 3pcs
  • Power supply cable
  • Software CD.

Carscope program is a free download and future updates are free. 

The program is compatible with Windows OS 

Items

Pcs

Weight (kg)

     

Extended Kit includes:

   
     

CarScope LAN basic kit *(see bellow)

1

1,00

Acupuncture Probe Set (5 probes)

1

0,05

Piercing Test Clip

2

0,10

Attenuator 10:1

2

0,10

Attenuator 20:1

2

0,10

25A Crocodile Clip black

1

0,05

25A Crocodile Clip red

1

0,05

AC/DC Current Clamp 60 Ampere

1

0,40

AC/DC Current Clamp 600 Ampere

1

0,40

Pressure Pulse Sensor

1

0,40

#1 Cylinder Trigger Pick-up Clamp

1

0,15

Capacitive Pick-up Clamp

4

0.50

Coil-on-Plug Pick-up Sensor

4

0.40

Coil-on-Plug Extension Lead

4

0.50

Carry case

1

1,00

     

* CarScope LAN basic kit includes:

   
     

CarScope LAN - main hardware unit

1

0,40

Universal main probe

1

0,15

Universal probes

3

0,25

Power supply cable

1

0,15

Ethernet cable 3m

1

0,08

Setup CD with the program

1

0,05

 


                                                                                                                                                         E: info@scantool-direct.co.uk

 

TEL: 02891 310 043