All Products

Page 7 of 8:    149 Items

1   2   3   4   5   6   7   8
Compare Selected        Show All Products
Secondary Ignition- HT Capacitive Clamp BNC Type | Scantool Direct

Secondary Ignition- HT Capacitive Clamp BNC Type | Scantool Direct£39.00   £29.99

Used for observing and measuring signals from the secondary ignition system's high-voltage spark plug leads. It can be used with most oscilloscopes

 
Test Harness for Bosch,Denso, Delphi and Piezo Fuel Injectors

Test Harness for Bosch,Denso, Delphi and Piezo Fuel Injectors£29.99

Complete set of Test harness for Fuel injectors, covers 5 main types

 
Maxiecu Mercedes Benz 38 pin to 16 pin adapter

Maxiecu Mercedes Benz 38 pin to 16 pin adapter£25.00

Maxiecu software compatible adapter Connects the 38 pin Mercedes Benz pre OBD2 to 16 pin OBD2 DLC, All K lines are wired.

 
16 pin OBD2 extension cable 3 m (10 ft)

16 pin OBD2 extension cable 3 m (10 ft)£23.00   £24.99

Allows one man testing of ABS/Parking sensors etc..

 
BMW Motorcycle 10 pin to OBD2 adapter

BMW Motorcycle 10 pin to OBD2 adapter£22.99

BMW Bike 10 pin to 16 pin OBD2 adapter

Includes VAT

 

 
Early Maserati 3200GT KKL cable and 3 pin connector

Early Maserati 3200GT KKL cable and 3 pin connector£22.99

Use this kit if your 3200GT model is fitted with the 3 pin diagnostic plugs

 
Fiat,  Alfa Romeo MultiECUScan KKL cable and 3 pin connector

Fiat, Alfa Romeo MultiECUScan KKL cable and 3 pin connector£22.99

Use this kit if your Fiat, Alfa Romeo or Lancia is a pre 2001 model with the 3 pin diagnostic plugs

 
4mm Banana Breakout Leads for Fuel injector, Camshaft, Crank  sensor,

4mm Banana Breakout Leads for Fuel injector, Camshaft, Crank sensor,£22.00

This breakout lead makes it easy to take live readings from various working sensors in the engine compartment

 
Fiat Alfa Romeo KKL Cable, pin switching Multiecuscan

Fiat Alfa Romeo KKL Cable, pin switching Multiecuscan£22.00

No need for the coloured adapters for this KKL cable, just select the required pin from the switch and connect to the module

 
J1962M OBDII Male to Open End, 10ft all 16 pins wired

J1962M OBDII Male to Open End, 10ft all 16 pins wired£20.00

Open end 10 foot OBD2 cable with all 16 pins wired

 
4mm Banana Backpinning  Probes, Automotive Needles

4mm Banana Backpinning Probes, Automotive Needles£19.99

The main application for the probes are for making measurements on the automobile electrical installation without damaging the wire insulation.

 
Carscope i-Tester J1962m OBD2 Power cable

Carscope i-Tester J1962m OBD2 Power cable£19.99

OBD2 power cable for Carscope i-Tester eliminates connection to battery. Allows faster and easier compression testing

 
IVECO 38 pin to 16 pin adapter for Delphi, Autocom Wurth WOW

IVECO 38 pin to 16 pin adapter for Delphi, Autocom Wurth WOW£19.99

Delphi, Autocom, Wurth WOW, compatible adapter Connects the 38 pin IVECO pre OBD2 to 16 pin OBD2 DLC, All K lines are wired.

 
MultiEcuScan Four Colour Adapter Lead Set

MultiEcuScan Four Colour Adapter Lead Set£26.00   £19.00

Top quality Four Colour Adapter cable set for Multiecuscan Italian vehicle software to access most control modules 

 
VAG-Com KKL USB  Diagnostic Interface

VAG-Com KKL USB Diagnostic Interface£19.00

Compatible with a range of diagnostic software for VAG, Fiat,Volvo,and some Motorcycles including Triumph

 
Cable, J1962M to 2-J1962F, Y-Cable, 1ft

Cable, J1962M to 2-J1962F, Y-Cable, 1ft£17.99

J1962 M/F Y to DB9F J1962M to 2-J1962F, Y-Cable

 
Fiat Alfa Romeo C19 A3 Adapter Cable

Fiat Alfa Romeo C19 A3 Adapter Cable£14.99

This cable converts the standard CAN signal to the one used by the Fiat and Alfa Cars, required for service reset etc,

 
 
1   2   3   4   5   6   7   8
Compare Selected        Show All Products

Page 7 of 8:    149 Items

 

Product Enquiry: Tel 02891 310 043
Product Support Tel 02891 310 044

E: info@scantool-direct.co.uk